How To Make Foam Falls (Hole Punch and Ties)

Forum rules
1) Clearly label your title
2) Add 'VID' to your title is there is a video/ Youtube link
That is it- easy peasy!
Post Reply
User avatar
Posts: 4075
Joined: Thu Aug 21, 2008 2:36 am
Location: Bay Area, California

How To Make Foam Falls (Hole Punch and Ties)

Post by IKickShins » Fri Aug 29, 2008 11:41 pm

What You Will Need
- Sheets of 2mm foam
- A sharp blade (we like using box cutters, but a smooth kitchen knife will work too if you don't have anything else)
- A straightedge/ruler
- A thick piece of cardboard, or a couple thin pieces stacked up
- A hole punch
- Zip ties, rexlace, or ribbon
- Tape or grommets (to reinforce the foam)

1. First, cut your strips of foam. Lay a sheet of foam flat on the cardboard and cut it, using the straightedge as a guide. Make sure the strips are 1" wide or less, but also take care not to cut them so narrow that you can't punch a hole in them. Use the straightedge to ensure that you're cutting uniform, even pieces.


(Click here for the rest of the tutorial! )
Last edited by IKickShins on Sat Dec 06, 2008 4:13 am, edited 1 time in total.
I Kick Shins - Now stocking olive green, pistachio, & neon purple kk jumbo braid!
IKS @ Etsy - Clip-in streaks & top hats galore!
Facebook - You know the drill ;)

User avatar
Sick Puppy
Posts: 84
Joined: Wed Sep 03, 2008 5:46 am
Location: Adelaide, South Australia

Re: How To Make Foam Falls (Hole Punch and Ties)

Post by Sick Puppy » Wed Sep 03, 2008 7:54 am

Wikkid tutorial - I didn't think that making foam falls would be that easy!

User avatar
Posts: 60
Joined: Wed Nov 05, 2008 7:26 am
Location: Philadelphia

Re: How To Make Foam Falls (Hole Punch and Ties)

Post by PoiZon » Wed Nov 05, 2008 7:46 am

I have always been trying to figure out foam falls. seems easy enough. but adding on the tubing and crin still troubles me :?: . I will have to get some and try it out.:D

User avatar
Posts: 222
Joined: Tue Sep 23, 2008 5:54 pm
Location: Chelmsford, UK

Re: How To Make Foam Falls (Hole Punch and Ties)

Post by cyberwench » Wed Nov 05, 2008 9:22 pm

I always used to tie the foam on in bunches of about 4 strips with rexlace, next time I'm so using cable ties, it will be so much quicker!

Post Reply

Return to “Cyberlox, Foam & Mixed Media”

Who is online

Users browsing this forum: No registered users and 2 guests