yarn wrap falls
Forum rules
1) Clearly label your title
2) Add 'VID' to your title is there is a video/ Youtube link
That is it- easy peasy!
1) Clearly label your title
2) Add 'VID' to your title is there is a video/ Youtube link
That is it- easy peasy!
- Amaryllis
- Posts: 70
- Joined: Wed Sep 30, 2009 12:13 pm
- Location: Melbourne, Australia
yarn wrap falls
I'm really not sure what to call this, but I found pics on my comp of a tutorial I made ages ago with a shoddy camera phone (The picture quality shows).
I hope no one minds me posting this.
Also I know a fair while back I had this was posted on VF's DTBD cult (My username was CitronicKitten), my account since has been deleted due to inactivity - So I'm not sure if this is still up there, of if it's fine to repost. If not, it can be taken down.
So the main idea behind these was I just wanted to get rid of some masses of el cheapo acrylic blended yarn you normally use for knitting that I had lying around. And yarn wraps I think are generally wrapped around your own hair, and I just used these to make falls instead as a more temporary option but didn't want them to look too obviously 'yarn-y" haha.
Pics of the end result:
Closeup:
Again I apologise for the pic quality, I don't mind redoing this at a later date with clearer pics.
What you'll need:
Some cheap yarn
Lace, or something to attach them to.
Scissors
A stiff-bristled scrub brush
Straightener.
1. Cut your lengths of yarn, generally longer than the length you want the end result to be.
(I used two different colours to show what was going on inside and outside)
2. Loop several strands of yarn over the lace and start braiding tightly until you get to the end.
Use more yarn to if you want a thicker end result.
3. Once you get to the end, use one of the loose end bits to make a tight knot at the end of your braid.
4. Using about 6-8 strands of yarn you've already precut, place them in a straight line without overlapping behind your braided strand. With about 2 inches overhanging on the left.
5. Fold the 2 inches on the left in a diagonal towards the right, holding it down tight.
6. Cross the remaining length you had overhanging on the right back over the diagonal bit you've just done, and wrap tightly in a downwards motion, locking the diagonal bit down, and working your way neatly down to the bottom. Try not to overlap any strands and keep it uniform. Knot it off once you reach the bottom.
7. Once you've finished wrapping and have made sure everything is super tight. Hold the wrap out straight and scruff it up with the scrub brush.
8. Flatten the edges down with a hair straightener. It just helps smooth the scruffy bits down and conceals the lines or "seams" of the yarn that make it obvious it's yarn.
9. What you should have is a nicely wrapped, smooth looking yarn-wrap.
10. Keep working till you have your desired amount. You can try different styles, use two different colours side by side in wrapping to create swirls, or use a single strand in an opposing colour to create criss-crosses, whatever you feel like.
The end~ Figured I should share this seeing I still have it on my computer haha.
Just some more pics of them.
Hell, I even made a full wig of these to get rid of some excess cheap yarn:
I hope no one minds me posting this.
Also I know a fair while back I had this was posted on VF's DTBD cult (My username was CitronicKitten), my account since has been deleted due to inactivity - So I'm not sure if this is still up there, of if it's fine to repost. If not, it can be taken down.
So the main idea behind these was I just wanted to get rid of some masses of el cheapo acrylic blended yarn you normally use for knitting that I had lying around. And yarn wraps I think are generally wrapped around your own hair, and I just used these to make falls instead as a more temporary option but didn't want them to look too obviously 'yarn-y" haha.
Pics of the end result:
Closeup:
Again I apologise for the pic quality, I don't mind redoing this at a later date with clearer pics.
What you'll need:
Some cheap yarn
Lace, or something to attach them to.
Scissors
A stiff-bristled scrub brush
Straightener.
1. Cut your lengths of yarn, generally longer than the length you want the end result to be.
(I used two different colours to show what was going on inside and outside)
2. Loop several strands of yarn over the lace and start braiding tightly until you get to the end.
Use more yarn to if you want a thicker end result.
3. Once you get to the end, use one of the loose end bits to make a tight knot at the end of your braid.
4. Using about 6-8 strands of yarn you've already precut, place them in a straight line without overlapping behind your braided strand. With about 2 inches overhanging on the left.
5. Fold the 2 inches on the left in a diagonal towards the right, holding it down tight.
6. Cross the remaining length you had overhanging on the right back over the diagonal bit you've just done, and wrap tightly in a downwards motion, locking the diagonal bit down, and working your way neatly down to the bottom. Try not to overlap any strands and keep it uniform. Knot it off once you reach the bottom.
7. Once you've finished wrapping and have made sure everything is super tight. Hold the wrap out straight and scruff it up with the scrub brush.
8. Flatten the edges down with a hair straightener. It just helps smooth the scruffy bits down and conceals the lines or "seams" of the yarn that make it obvious it's yarn.
9. What you should have is a nicely wrapped, smooth looking yarn-wrap.
10. Keep working till you have your desired amount. You can try different styles, use two different colours side by side in wrapping to create swirls, or use a single strand in an opposing colour to create criss-crosses, whatever you feel like.
The end~ Figured I should share this seeing I still have it on my computer haha.
Just some more pics of them.
Hell, I even made a full wig of these to get rid of some excess cheap yarn:
Last edited by MissAnthropik on Mon May 31, 2010 7:54 pm, edited 1 time in total.
Reason: to make title clearer
Reason: to make title clearer
- WalksWithStrangers
- Posts: 977
- Joined: Thu May 14, 2009 11:01 pm
- Location: Oxfordshire
Re: Alternative to Yarn wraps/Look alike roving?
Waa those are great! The wigs brilliant!
I have a cheapy halloween wig i may do this to...
I have a cheapy halloween wig i may do this to...
Texas Chainsaw Teletubby: Po!
- Squidgy
- Posts: 2355
- Joined: Thu Dec 18, 2008 5:15 pm
- Location: Bucks, UK
- Contact:
Re: Alternative to Yarn wraps/Look alike roving?
This is a great tutorial but could I be cheeky and ask is there any chance of getting better quality pictures as it is difficult to see what is happening as the pictures are too blury, thanks!!
"I don't follow no religion, bow to the DJ, worship the riddum!!" ♬ ♫ ♪ ılıll|̲̅̅●̲̅̅|̲̅̅|̲̅̅●̲̅̅|llılı ♪ ♫ ♬
- Amaryllis
- Posts: 70
- Joined: Wed Sep 30, 2009 12:13 pm
- Location: Melbourne, Australia
Re: Alternative to Yarn wraps/Look alike roving?
Haha no problems XD I'll eventually get around to it.Squidgy wrote:This is a great tutorial but could I be cheeky and ask is there any chance of getting better quality pictures as it is difficult to see what is happening as the pictures are too blury, thanks!!
I did that during a time when all I had was a reaaally crappy camera phone.
- SyNNy+SuKKupyre
- Posts: 768
- Joined: Fri Apr 03, 2009 11:52 am
- Location: Etobicoke, Ontario, Canada
- Contact:
Re: Alternative to Yarn wraps/Look alike roving?
I remember this tut!
It inspired so many of my yarn adventures <3
It inspired so many of my yarn adventures <3
Psylita Sukkubus
Keeping things uniquely odd since '91
Keeping things uniquely odd since '91
- [Phexxie]
- Posts: 1344
- Joined: Fri Aug 22, 2008 10:58 pm
- Location: Liverpool, UK
Re: Alternative to Yarn wraps/Look alike roving?
hmm... i have a mountain of old, unused yarn hanging around in my room...
it finally has a purpose
thanks for the tut! i might give this a go soon
it finally has a purpose
thanks for the tut! i might give this a go soon
-
- Posts: 44
- Joined: Sun Jan 03, 2010 3:21 pm
Re: Alternative to Yarn wraps/Look alike roving?
I still don't quite get it how you finished the wrap ( the end of it). Did you make a knot from the red yarn in the picture too?
- brandalynn
- Posts: 631
- Joined: Wed Nov 11, 2009 1:34 am
- Location: Kansas City, Missouri (USA)
Re: Alternative to Yarn wraps/Look alike roving?
I am drooling right now! Awesome! I have a whole paper bag full of scrap yarns and it will be going to this project. Thanx for posting!
"Behind every great man is a woman rolling her eyes" --- bumper sticker---
-
- Posts: 702
- Joined: Wed Nov 04, 2009 6:00 am
Re: Alternative to Yarn wraps/Look alike roving?
awesome tut! I have loads of yarn from my "I need to learn to knit" phase.
- rivetlicker_
- Posts: 4561
- Joined: Thu Aug 21, 2008 4:54 am
- Location: Sydney AU
Re: Alternative to Yarn wraps/Look alike roving?
What is the end texture of these?
- brandalynn
- Posts: 631
- Joined: Wed Nov 11, 2009 1:34 am
- Location: Kansas City, Missouri (USA)
Re: Alternative to Yarn wraps/Look alike roving?
I finished a set of these, so I hope it's ok to post a pic. They feel really soft, almost like a cheap angora sweater if that makes much sense I used a regular iron (don't have a straightener), but I got the same results. My ends have these bulbs from knotting the yarn because I wasn't sure how to finish them. Reminds me of those tentacle monsters from FFVIII in the training center. How do you get the ends smooth and bulb free?
"Behind every great man is a woman rolling her eyes" --- bumper sticker---
-
- Posts: 702
- Joined: Wed Nov 04, 2009 6:00 am
Re: Alternative to Yarn wraps/Look alike roving?
wow yours look great!! Did you buy the yarn like that or is it three different coors of yarn?brandalynn wrote:I finished a set of these, so I hope it's ok to post a pic. They feel really soft, almost like a cheap angora sweater if that makes much sense I used a regular iron (don't have a straightener), but I got the same results. My ends have these bulbs from knotting the yarn because I wasn't sure how to finish them. Reminds me of those tentacle monsters from FFVIII in the training center. How do you get the ends smooth and bulb free?
- brandalynn
- Posts: 631
- Joined: Wed Nov 11, 2009 1:34 am
- Location: Kansas City, Missouri (USA)
Re: Alternative to Yarn wraps/Look alike roving?
Thanx I bought the variagated yarn and cut lengths from the end of the darkest color to the start of the lightest color then wrapped from light beige to dark brown. I'm hoping to start some that go from yellow, lime green and turqouise, but alas, my ends look so funny I've put a hold on that project.
"Behind every great man is a woman rolling her eyes" --- bumper sticker---
-
- Posts: 702
- Joined: Wed Nov 04, 2009 6:00 am
Re: Alternative to Yarn wraps/Look alike roving?
I wish you had a close up of your ends, from your pic they look fine to me.brandalynn wrote:Thanx I bought the variagated yarn and cut lengths from the end of the darkest color to the start of the lightest color then wrapped from light beige to dark brown. I'm hoping to start some that go from yellow, lime green and turqouise, but alas, my ends look so funny I've put a hold on that project.
- brandalynn
- Posts: 631
- Joined: Wed Nov 11, 2009 1:34 am
- Location: Kansas City, Missouri (USA)
Re: Alternative to Yarn wraps/Look alike roving?
They're really knobby and it was a pain brushing enough yarn to cover most of the knot.
"Behind every great man is a woman rolling her eyes" --- bumper sticker---
-
- Posts: 702
- Joined: Wed Nov 04, 2009 6:00 am
Re: Alternative to Yarn wraps/Look alike roving?
Hrmm, I wonder if theres like a way to seal them, like maybe wetting them, or glue. I don't think heat would do anything. I haven't really ever messed with yarn like that. Hrmm...brandalynn wrote:
They're really knobby and it was a pain brushing enough yarn to cover most of the knot.
- E-liz
- Posts: 37
- Joined: Sun Aug 24, 2008 6:14 pm
- Location: Lenawee County,Michigan
- Contact:
Re: yarn wrap falls
Thats how I have been sort of doing my yarn falls for yrs now very nice
- Synful-Synthetics
- Posts: 445
- Joined: Tue Sep 07, 2010 4:57 am
- Location: Kelowna, BC Canada
- Contact:
Re: yarn wrap falls
I fell in love the moment I saw this. I used to make yarn extensions before I learned how to work with kk.
But I never made anything as awesome as this.
Ever since I saw this tut I have been working on making some. I can't wait to see how they turn out
But I never made anything as awesome as this.
Ever since I saw this tut I have been working on making some. I can't wait to see how they turn out
-
- Posts: 1172
- Joined: Fri Mar 20, 2009 2:43 pm
- Location: baltimore maryland, u.s.
- Contact:
Re: yarn wrap falls
wow thats exactly how i used to do mine! lol
- FaerieGirl
- Posts: 296
- Joined: Mon Oct 26, 2009 10:05 pm
Re: yarn wrap falls
I think I just found my new favorite stash-buster, and I have a HUGE stash to bust!! So excited! Thanks!!
Taking over the world, one cupcake at a time. http://www.facebook.com/pages/CausticCu ... 7885476928
CURRENTLY TAKING ORDERS
CURRENTLY TAKING ORDERS
- Jynx
- Posts: 555
- Joined: Wed Jun 24, 2009 1:28 am
- Location: St Louis/Hannibal, Missouri/Flint, MI, US
Re: yarn wrap falls
I've used this quite a few tomes! Do you mind if I post this back on VF?
For the ends, if you take a few pieces, wrap, tie, and snip, you end up with a smaller knot.
For the ends, if you take a few pieces, wrap, tie, and snip, you end up with a smaller knot.
- brandalynn
- Posts: 631
- Joined: Wed Nov 11, 2009 1:34 am
- Location: Kansas City, Missouri (USA)
Re: yarn wrap falls
Bwaahahaha!!! Thank you! The knots on the end were still driving me nuts Such a simple answer, too. Makes me feel all sorts of fail.
"Behind every great man is a woman rolling her eyes" --- bumper sticker---
-
- Posts: 81
- Joined: Sun Mar 27, 2011 2:01 am
Re: yarn wrap falls
I must of done something wrong..
When I started to scruff it up with a brush, the yarn at the top started coming unraveled. =[ I wrapped it pretty tightly at the top to prevent that but it still happened.
When I started to scruff it up with a brush, the yarn at the top started coming unraveled. =[ I wrapped it pretty tightly at the top to prevent that but it still happened.
-
- Posts: 2
- Joined: Wed Jul 27, 2011 7:20 am
- Location: Alberta, Canada
- Contact:
Re: yarn wrap falls
I like to thread the yarn through the top of the braid with a loopy needle so it stays there. Works for me!Tipsyxx wrote:I must of done something wrong..
When I started to scruff it up with a brush, the yarn at the top started coming unraveled. =[ I wrapped it pretty tightly at the top to prevent that but it still happened.
Who is online
Users browsing this forum: No registered users and 22 guests